Showing entries 1-18 out of 18.
The device name of the trackpoint
The drag hysteresis controls how hard it is to drag with z-axis pressed
This parameter controls the period of time to test for a 'hands off' condition (i.e. when no force…
Enable scrolling while holding the middle mouse button
Enable sensitivity and speed configuration for trackpoints
Disable or enable external pointing device
Switch to "bare" PS/2 mouse support in case Trackpoint buttons are not recognized properly
Negative inertia factor
Minimum curvature in degrees required to generate a double click without a release
Minimum amount of force needed to trigger dragging
Setting this to true will enable the Press to Select functions like tapping the control stick to s…
Backup range for z-axis press
Trackpoint sensitivity
When the skipback bit is set, backup cursor movement during releases from drags will be suppressed
Speed of the trackpoint cursor
Minimum value for z-axis force required to trigger a press or release, relative to the running ave…
The offset from the running average required to generate a select (click) on z-axis on release
This attribute determines how sharp a press has to be in order to be recognized